To use “TV Reminders”, enter the channel password.
To change preferences, enter the channel password.
To set the hot key, enter the channel password.
You must give the mark a name.
The mark name can be no more than 15 characters long.
You must have at least one channel set up.
Channel names cannot begin with a dash.
You must select a channel that has been set up.
There is not enough memory to copy the Teletext display to the clipboard. Try increasing the application memory size.
An error occurred while trying to copy the Teletext display to the clipboard.
Teletext is not available on this channel.
Waiting for page...
Teletext is only available when the video source is set to TV.
You must give the channel a name.
Are you sure you want to auto tune the TV? This will replace any channels you have already set up.
This time value exceeds the length of the movie.
The Movie Selection Menu has no more room.
Do you really want to delete the existing marks in ^3?
Do you wish to release control of ^3?
You have released control of ^3.
Chapter numbers must be between 0 and 79.
Frame numbers must be between 0 and 108000.
Time values for LaserDiscs must be less than 1 hour.
Time values for minutes and seconds must be between 0 and 59.
Time values must be entered in Minutes:Seconds format. For example, to enter 10 minutes and 30 seconds, type “10:30”.
Time values must be entered in Hours:Minutes:Seconds format. For example, to enter 1 hour 10 minutes and 30 seconds, type “01:10:30”.
This disc does not support chapter searching.
This command is not supported for Extended Play (CLV) discs.
There is no disc in the player.
The name can be no more than 15 characters long.
You cannot set up channels while recording.
You must make the video window visible before recording.
To open a saved picture, use SimpleText or any graphics program.
There is not enough memory to copy the video display to the clipboard. Try reducing the size of the video window or increasing the application memory size.
An error occurred while trying to copy the video display to the clipboard.
You must enter a channel number between ^0 and ^1.
There is not enough disk space to compress the movie. You may save the movie, but it will not be compressed.
There is not enough memory to compress the movie. You may save the movie, but it will not be compressed.
An error occurred while compressing the movie. You may save the movie, but it will not be compressed.
Before you can change the password, you must enter the current password.
To use “Channel Setup”, enter the channel password.
To enable the locked channel, enter the channel password.
Channel ^3 is locked. Would you like to enable it?
There is not enough memory to use Apple Video Player. Try increasing the application memory size.
You must have at least one channel that is not locked.
Your clue must be no more than 63 characters long.
Apple Video Player requires the Video Startup extension to be installed. Make sure it has been installed in the extensions folder and that your computer has been restarted.
You must show the video window before recording.
You cannot change the window size while recording.
You cannot close the video window while recording.
There is not enough disk space to continue recording.
There is not enough memory to continue recording.
The movie could not be saved because ^0.
The picture could not be saved because ^0.
There is not enough disk space to record.
There is not enough memory to record. Try reducing the size of the video window or increasing the application memory size.
An error occurred while trying to record.
You cannot freeze the video display while recording.
There is not enough memory to freeze the video display. Try reducing the size of the video window or increasing the application memory size.
An error occurred while trying to freeze the video display.
Your computer does not support S-Video input.
You must install QuickTime version 1.5 or later to use Apple Video Player.
Apple Video Player requires a monitor that can display at least 16 colors.
To use this feature, you must have a TV tuner installed in your computer.
Apple Video Player does not support printing from the Finder.
The width must be at least ^0 pixels, but no more than ^1 pixels.
The height must be at least ^0 pixels, but no more than ^1 pixels.
You may only enter a 3 digit number.
Apple Video Player could not find the necessary video hardware. Make sure that your computer has video input capabilities and that you are not running any other video applications.
Are you sure you want to use a single key to turn Apple Video Player on and off?
Before you can use Apple Video Player, you must set up your TV channels.
You must have at least one channel selected.
The channel name can be no more than 15 characters long.
Your password must be no more than 15 characters long.
That is not the correct password. Please try again.
An error occurred while writing the Apple Video Player Prefs file.
An error occurred while reading the Apple Video Player Prefs file.
There is not enough memory to continue.
Apple Video Player requires system version 7.0 or later.
